Connecting an audio or MIDI device
Connect an audio device (such as a powered speaker or a mixer) to output audio of this unit to the audio device.
Use a monaural cable (standard 1/4-inch plug) to make the connection.
Tips |
• To enable speaker output of this unit at the same time, set the [SPEAKER(ON/OFF)] switch to “ON”. |
Connect a set of stereo headphones to the PHONES jack (1/8-inch connection).
Tips |
• Connecting headphones will mute the speaker outputs, but not the LINE OUT outputs. If you wish the sound to go through the headphones only, make sure the LINE OUT (MONO) jack is disconnected. |
Connect a MIDI device (such as an arranger keyboard) to transmit MIDI data to it.
Use a MIDI cable (5-pin DIN) to make the connection.