Turning on or off this unit

■ Turning on this unit

1     Rotate the [Master Volume] knob counterclockwise to set the volume at minimum.

2     Press the [Power] button.

This unit turns on and the power LED lights up.

Note

• Do not touch the strumplate or Instant OFF plate while this unit is powering on. The plate sensors are calibrated at startup.

3     Turn on external devices.

4     Press any of the chord buttons. While sliding your finger on the strumplate, gradually rotate the [Master Volume] knob clockwise to adjust the volume.

Note

• When adjusting the volume, also adjust the [STRUMPLATE Main Volume] knob to enable sound.

5     Adjust the volume of the external device (such as a powered speaker).

■ Turning off this unit

1     Set the volume of the external device (such as a powered speaker) at minimum.

2     Turn off any external devices.

3     Press and hold the [Power] button for two seconds.

The power LED tuns off and the power of this unit goes off.

Tips

• If no buttons or knobs are used for 30 minutes, this unit will automatically turn off (auto power off). You can enable/disable the auto power off function (⇒).

Note

• The selection state of the buttons is not memorized when this unit is turned off (except the following settings).

- Rhythm tone setting (classic mode) (⇒)

- MIDI transmit setting (⇒)

- Auto power off setting (⇒)

- Battery level indicator setting (⇒)