Battery level indicator setting

When batteries are used, the Power LED indicates the current battery level (⇒).

Due to the characteristic of rechargeable batteries (Ni-MH), the battery level may be recognized less than the actual amount.

When using rechargeable batteries (Ni-MH) or when replacing them with alkaline batteries, configure the battery level indicator setting.

(Factory setting: Alkaline battery)

■ When using rechargeable batteries (Ni-MH)

1     Turn off this unit (⇒).

2     Press and hold the [Chord Hold] button and press the [Power] button.

The [Chord Hold] LED flashes for a few seconds.

This unit is turned on with the new setting.

■ When using alkaline batteries

1     Turn off this unit (⇒).

2     Press and hold the [Chord Manual/Auto] button and press the [Power] button.

The [Chord Manual/Auto] LEDs flash for a few seconds.

This unit is turned on with the new setting.