a [Master Volume] knob
Use this knob to control the volume of entire instrument (⇒).
b [Power] button
Use this button to turn on/off this unit (⇒).
Tips |
• When using batteries, the Power LED works as a battery level indicator (⇒). |
c [PATTERN] buttons
Use these buttons to select a rhythm pattern (⇒).
Press the left button (yellow) to switch between the upper and lower sets, and the five right-hand buttons to select a rhythm pattern.
d [VOICE] buttons
Use these buttons to select a strumplate voice (⇒).
Press the left button (yellow) to switch between the upper and lower sets, and the five right-hand buttons to select a voice.
e [KEYBOARD (ON)] button
Use this button to enable/disable the keyboard mode (⇒).
In keyboard mode, the chord buttons, strumplate and Instant OFF plate work as a keyboard/drum set.
f [RHYTHM] knobs
Use these knobs to adjust the tempo and rhythm volume (⇒).
[Tempo] knob: Use this knob to adjust the rhythm tempo.
[Volume] knob: Use this knob to adjust the rhythm volume.
g [STRUMPLATE] knobs
Use these knobs to adjust the sustain and volume of the strumplate voice (⇒).
[Sustain] knob: Use this knob to adjust the sustain level of the strumplate.
[Main Volume] knob: Use this knob to adjust the volume of the strumplate (main voice).
[Sub Volume] knob: Use this knob to adjust the volume of the strumplate (sub voice).
h [CHORD Volume] knob
Use this knob to adjust the volume of the chord/bass sounds (⇒).
i Chord buttons
Use these buttons to select a chord (⇒).
In keyboard mode, these buttons work as a keyboard/drum set (⇒).
j [REAL TIME CONTROL] buttons
Use these buttons to select play modes for the chord and rhythm (⇒).
Button | Function |
|---|---|
[Chord Manual/Auto] button | Use this button to enable/disable automatic chord/bass playing. Manual: Automatic chord/bass playing is disabled. Auto: Automatic chord/bass playing is enabled. Chord/bass automatically sounds according to a selected rhythm pattern. |
[Chord Hold] button | Use this button to enable/disable the chord hold function. On (LED turns on): The last selected state (automatic chord/bass playing) is maintained even after you release the chord button. Off (LED turns off): Automatic chord/bass playing stops when you release the chord button. |
[Rhythm Start/Sync Start] button | Use this button to turn on/off the rhythm synchronization. Start: The selected rhythm sounds continuously. Sync Start: The selected rhythm sounds in synchronization with chord playing. |
k Strumplate
Slide or tap this plate with your finger to create sounds (⇒).
l Instant OFF plate
Tap this plate to stop playing sounds (⇒).
m Speaker